Star Necklace Instructions:
*The finished necklace length is approximately 36” and will require the use of a hand drill.
1. Cut a 17” length of chain.
2. Use jump rings to link together a segment of 5 Small Donut Connectors and join to the 17” length of chain.
3. Use the hand drill to make a small hole in the Star Pendant at each tip of the two points opposite the top hole of the pendant. Attach the segment of linked connectors to the top hole of the pendant.
4. Cut a 10” length of chain and attach to one of the newly created holes in the Star Pendant.
5. Use a link of chain to attach a Large Donut Connector to the second hole created in the Star Pendant. Cut a 10.5” length of chain and attach to the Large Donut Connector.
6. Attach a Large Donut Connector to the end of the 10.5” length of chain. Use a link of chain to attach a Square Spiral Connector to the Large Donut Connector. Attach a link of chain to the Square Spiral Connector.
7. Join the 10” length of chain from Step 4 and the segment from Step 5 to the Orange Geo Pendant. To the other loop of the Orange Geo Pendant, use single links of chain to join a Square Spiral Connector to a Large Donut Connector to a Square Spiral Connector. To complete the necklace, link the last Square Spiral Connector to the 17” length of chain from Step 1.

Star Necklace Materials:
1 – Hammered Silver Star Pendant BM16258
1 – Orange Geo Pendant BM16262
5 – Small Donut Connectors BM16315
3 – Large Donut Connectors BM16315
3 – Square Spiral Connectors BM16284
40” – Silver Oval Link Chain BM12344
6 – Silver 7mm jump rings BM11148

Linked Bracelet Instructions:
1. Use jump rings to link the connectors in the order shown in the picture.
2. Add the first and last connectors to the Toggle Clasp.
3. Use a jump ring to add a Square Spiral Charm to the Toggle Clasp.

Linked Bracelet Materials:
1 – Silver Hammered Toggle Clasp BM16310
5 – Small Donut Connectors BM16315
3 – Large Donut Connectors BM16315
3 – Square Spiral Connectors BM16284
1 - Square Spiral Charm BM16284
6 – Silver 7mm jump rings BM11148

Orange Earring Instructions:
1. For each earring, add an Orange Charm to a jump ring, followed by a Square Spiral Dangle and add to an ear wire.

Orange Earring Materials:
2 – Orange Enamel Charms BM16302
2 - Square Spiral Charms BM16284
2 – Silver ear wires

TOOLS:
Hand Drill
Wire cutters
Chain nose pliers